The NITRO® ZV21 Z-PRO Package gives you a host of the most popular high-performance upgrade options at an incredible value—you save more than $2,987 off the normal upgrade price!
Our flagship fiberglass Deep V is available with a hardcore fishing upgrade package that includes everything you need to tackle the toughest fish in the roughest water—from the Lowrance® HDS-9 and HDS-12 Carbon Touch fishfinders with 3D StructureScan® that network with the upgraded trolling motor, to the Mercury® 9.9HP kicker motor for serious big water trolling. Plus, the Lowrance® Point-1 GPS antenna gives accurate position and heading at any speed.
An extra trolling battery and 2 chargers keep you powered, and a walk-thru windshield keeps you dry and warm, extending your fishing season into the early and late portions of the seasons. If choosing a Verado® motor, there are even Verado-specific electric hydraulic tilt steering and digital gauges. And it rides proudly on a custom-fit, tandem-axle trailer with GALVASHIELD® Impact corrosion and chip protection, tongue step and swing-away tongue.
- Length: 21 ft. 7 in.
- Beam: 100 in.
- Bottom width: 77 in.
- Max. recommended HP: 350 hp
- Fuel capacity: 64 gal.
- Max. person capacity: 6 persons
- Max. person weight: 1200 lb.
- Max. weight capacity: 2500 lb.
- Interior depth: 25 in.
- Transom height: 28 in.
- Deadrise: 18 deg.
- Draft: 18 in.
- Approx. weight: 2900 lb.
- Approx. package weight: 5500 lb.
- Package height: 6 ft. 9 in.
- Package width: 8 ft. 6 in.
- Storage length: 24 ft. 7 in.
Comfort, Convenience & Peace of Mind
- NMMA® certified
- Flotation meets or exceeds NMMA® & U.S. Coast Guard Requirements
- EPA-compliant fuel system
- Gunnels designed to maximize interior space & fishing room
- 3 stainless steel drink holders
- 4 stainless steel pull-up cleats
- Stainless steel bow & stern eyes
- Anti-fatigue matting below bow & cockpit carpet
- Emergency boarding ladder
- Passenger grab handle
- Fire extinguisher
- Hydraulic steering w/custom tilt wheel
- Heavy-duty molded, tinted windscreens
- Custom-molded port & starboard modular consoles w/2-tone gelcoat scheme
- Oversized carpeted, lockable port glovebox
- Below-console footrest w/non-skid mat
- Port & starboard below-console shelves
- Helm below-console recess for optional Hot Foot™ pedal
- Veethree® multi-function instrumentation gauges w/speedometer/fuel gauge, tach/trim gauge, voltmeter gauge & water pressure gauge
- Digital keypads w/integrated master power switch
- Side-mounted LED courtesy light
- Space to mount additional electronics
Construction & Exterior
- NEW 100% composite deck core w/superior thermal stability & strength-to-weight ratio
- Deck & hull chemically bonded & mechanically fastened
- Gelcoated stringer/liner system
- Foam-filled hull for optimal buoyancy & safety
- Full-width fiberglass-encapsulated composite transom
- Hand-laid, heavy-duty performance hull w/reinforced sides
- E-Start emergency jump start system
- Bow panel w/trolling motor receptacle, vent fan, bilge, navigation light, anchor light & trim switches
- Redundant automatic bilge pump system w/dual 1,600 GPH (6,057 LPH) pumps
- Stowable navigation lights
- Heavy-duty Interstate® 27M-XHD starting battery
- 3 heavy-duty Interstate® Series SRM-29 trolling batteries (4 total w/Z-PRO)
- 4-bank, 35-amp onboard battery charger w/exterior receptacle (3 total chargers w/Z-PRO)
- Automotive style, labeled fuse panel w/cover
- Manual LED lighting in bow storage compartments
- Master power switch
- 6-gauge trolling motor wiring w/50-amp circuit breaker
- Ventilation fan system in bow storage
- Console-mounted 12V outlet
- Waterproof Deutsch gauge plugin connectors
- Water/abrasion-resistant connectors
- NEW Z-Core seating system w/Force Flex suspension & contoured, rotomolded frame (driver & passenger seats)
- Bike seat w/hydraulic pedestal
- Folding molded fishing seat w/hydraulic pedestal
- Bow & aft lockable storage compartments
- Port & starboard bow lockers w/lift assists
- 3-level center rod locker w/organizers for rods up to 8' (2.44 m)
- Passenger rod ramp w/rod handle organizer & hold-down strap
- Port & starboard midship insulated storage boxes designed to accept tackle trays
- Between-console foldout storage drawer w/two 3600 tackle boxes
- Starboard tool holder
- 2 lift-out, molded aft storage boxes that will each accept seven 3700 tackle trays
- Extra-large integrated port net holder
- Port bow cooler w/removable tray
- 24-oz. (.68 kg) plush, marine-grade, cut pile carpet on decks & floor
- Insulated aluminum lids w/welded corners
- Room to RAM-mount additional electronics at bow
- Stainless steel fore & aft rails (port & starboard)
- Stainless steel lockable compression latches
- 5.5-gal. (21 L) insulated bow baitwell w/removable bucket
- Aft 26-gal. (98 L) insulated Guardian™ anti-slosh rotomolded livewell w/rounded corners, removable divider & bait bucket
- Two 500 GPH (1,893 LPH) aerator/fill pumps w/timers (1 for baitwell, 1 for livewell)
- Two 750 GPH (2,839 LPH) recirculator pumps w/timers (1 for baitwell, 1 for livewell)
- Pump-out systems (baitwell & livewell)
- Oxygen generators (baitwell & livewell)
- Livewell lid latching to keep lid closed at speed & in rough conditions
- Insulated aluminum lids w/welded corners
- Deep V performance hull w/Rapid Planing System transom
- 3" (7.6 cm) adjustable jack plate (Verado® motors only)
- 10" (25.4 cm) adjustable jack plate (OptiMax® motor only)
- Lifting strakes to maximize overall handling & performance
- Transom designed for Kicker motor application
- Rigging tube
- Stainless steel propeller
- Custom-fit, tandem-axle NITRO® trailer w/powder-coat finish & GALVASHIELD® Impact corrosion & chip protection for improved durability
- NEW integrated boarding step w/safety handle for easier boarding/reboarding at bow while boat is on trailer
- NEW 7-pin connector
- Surge disc brakes on 2 axles
- Inside the frame brake line system w/1-point bleed
- 14" (35.6 cm) custom NITRO® aluminum wheels w/radial tires
- No Touch Vortex hub lubrication system w/6-yr. 100,000-mile limited warranty
- Spare tire carrier w/matching spare tire
- All-welded rectangular GALVASHIELD® frame
- Space-saving swing-away tongue to reduce storage length
- 1,600-lb. (726 kg) swing-up locking jack w/swivel wheel
- Heavy-duty winch w/non-binding nylon strap & bow safety strap
- Outboard motor support to reduce hull & transom stress while towing
- Fiberglass fender design w/integrated back-up lights
- Carpeted bunks & fender boards to protect hull
- Submersible LED lights
- Safety cables
- NEW quick-release bracket for Minn Kota® or MotorGuide® trolling motor
- Pedal recess that will accommodate Minn Kota® or MotorGuide® trolling motor pedal
- Bow Lowrance® HDS-9 Carbon Touch RAM mounted fishfinder w/3D StructureScan®
- Console Lowrance® HDS-12 Carbon Touch RAM mounted fishfinder w/3D StructureScan®
- Lowrance® Point-1 GPS antenna
- MotorGuide® Xi5 36V, 105-lb. (47.6 kg) thrust, 50" (1.27 m) shaft, foot-control trolling motor w/sonar, trolling motor stabilizer & remote
- Networking between fishfinders & trolling motor
- Mercury® 9.9 remote ProKicker w/built-in fuel tank
- Kicker stereo system w/speakers
- Factory-applied keel protector
- Walk-thru windshield
- 2-bank, 20-amp battery charger
- 3-bank, 30-amp battery charger
- 1 extra SRM29 trolling battery
- 31M-AGM cranking battery upgrade
- w/Verado® motor: Verado electric hydraulic tilt steering & Verado digital gauges
2nd Dash Graph Options
- Lowrance® HDS-7 Carbon w/StructureScan®. (dash-mounted unit w/StructureScan must be selected) & bracket mount.
- Lowrance® HDS-9 Carbon w/StructureScan®. (dash-mounted unit w/StructureScan must be selected) & bracket mount.
- Lowrance® HDS-12 Carbon w/StructureScan®. (dash-mounted unit w/StructureScan must be selected) & bracket mount.
Performance & Steering Options
- Lenco trim tabs
- Bravo One® propeller
Hardware & Equipment Options
- Aft deck rail
- Bimini top
- Canvas enclosure (must have windshield option)
- Canvas enclosure w/curtain (must have windshield option)
- Thumbscrew rail mount rod holders (set of 2)
- Thumbscrew rail mount rod holders (set of 4)
- Thumbscrew rail mount rod holders (set of 6)
- Tournament ruler
Cushions & Seating Options
- Fishing chair & pedestal
- Smooth Moves seat suspension
- Remote oil fill (available w/OptiMax® motors only)
- SmartCraft® gauges (standard w/Verado® motors)
- 6" (15.24 cm) BMS hydraulic jack plate (available w/Verado® motors only)
- 18" (45.72 cm) custom wheels w/spare tire
- 250 XL OptiMax® Pro XS
- 250 XL Verado® Pro FourStroke
- 300 XL Verado® Pro FourStroke
- 350 XL Verado®